Until 2019 shipping small parts would always be cheapest by post.
Starting 2020 this is no longer the case, especially outside the EU.
For technical reasons, the manuals have been moved to a forum section.
Please log in and then visit The Manual Forums
If you find things are not working or missing, please send an email.
The manual for using your self steering system is part of the Mister Vee brochure that can be found in the download section.
Log in for access to the manuals
If you have a Mister Vee self steering system, you need to have your account enabled for access to the detailed manuals for assembly and fitting your system.
This is done when the system is shipped.
If you bought your system before the current website was set up, you will need to have your access re-enabled. Please let us know by sending an email.
If you buy a second hand system, please let us know who you bought the system from and we will enable your account so you have access.
If you do not yet have one, please create an account first before asking us to enable the account for access to the manuals.
Starting 2015 the systems are shipped with epoxy based rudders. Please read the separate page about this new development.
There are assembly manuals for assembly from scratch as was needed with most systems delivered before 2013 and mini manuals for final assembly of pre assembled systems.
You should only see the manuals that you need for your particular system so you will probably miss some numbers in the sequence.
If you do not see manuals you did get parts for, please let us know.
There are manuals in this list for the following systems:
- WALT BYO
- Mr. Vane
- Stainless WALT
- Mister Vee USD windvane conversion kit for Navik
Manuals for Mr. Vane Xprmntl (2006) and DIY Walt are available from Mister Vee, please email your request.
About using the manuals
ylbmessa derorriM | Mirrored assembly
If you need to take (part of) your Mister Vee system apart, keep a note of the following:
Some parts of the systems can be assembled in more than one way. Keep a look at the pictures and check that you are not assembling a mirror image.
This is particularly important for the windvane (095) and all vane bases. If you assemble the windvane to the mirror image but the vane base as normal, your system WILL NOT STEER correctly!
Download the pdf's
Below there are links to pages that each have a pdf to be downloaded at the bottom. All of the manuals have a date printed so you can check for more recent versions.
If you need to see more detail, the pdf lets you zoom in quite a bit!